Grab bridge crane

1. This crane is applicable to warehouses and workshops of metallurgical, cement, chemical and other enterprises, and is engaged in the handling of ore, limestone, mineral powder, coke slag, coke, coal, sand and other granular materials indoors or outdoors at a fixed time.

2. This machine belongs to A6 working level, and its lifting capacity includes the self weight of grab.

3. The machine is composed of five parts: box bridge, crane running mechanism, trolley, grab and electrical equipment, all of which are operated in the cab.

4. The fetching device is a four tail grab with double drums, which has simple structure and reliable operation. The grab can be opened and closed at any height. When the material block is less than 100mm, the effect is good and the productivity is high. When the material block is greater than 200mm, the toothed grab should be selected.

5. The grab is only applicable to bulk materials in the natural accumulation state. When grabbing underwater materials or special materials, it needs to be specially raised when ordering.

6. When it is used in the open air, it is equipped with rain proof equipment.

(1) The bridge adopts box girder, which is welded by automatic submerged arc welding.

(2) The trolley adopts a new conductive device of I-steel track cable, which is safe and reliable.

(3) The lifting mechanism can also be equipped with another set of safety device according to requirements. Increase reliability.

(4) Standardization, serialization and generalization of parts.

(5) The control room has a wide field of vision, all mechanisms are operated in the control room, and the operation is flexible.